Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Internal Door Handle of Your Car?

Model: (Various brands) Various
Part: Car door

To repair the internal opening mechanism of the door on your vehicle, follow the instructions provided below, and refer to the video as well. The first step is to remove the internal door panel; this procedure may vary depending on the vehicle, but you will need to unscrew all the fastening screws and detach all the clips around the panel. Once the panel is removed, you will have access to the handle. Usually, when the door cannot be opened, it is because the steel cable attached to the internal handle has come loose. To restore the proper function of the handle, reconnect the cable securely to the handle, and the problem will be resolved.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Car Door Panel
How to Remove the Car Door Panel
(Various brands) Various Removing the car door panel is a very simple operation. As you can see from our brief video tutorial, to remove the panel, you first need to take off…
Removing the External Door Handle
Removing the External Door Handle
(Various brands) Various Is the external door handle damaged? Here’s how to remove and replace the handle. Open the car door, then unscrew the screws on the plastic trim of t…
How to Replace the External Handle
How to Replace the External Handle
(Various brands) Various Removing the external door handle? Open the car door and see how to disassemble it. Remove the cover cap from the side door, insert the screwdriver i…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos