Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Handle

Model: (Various brands) Various
Part: Handle

Removing the external door handle? Open the car door and see how to disassemble it. Remove the cover cap from the side door, insert the screwdriver into the hole in the door (side panel). After removing the securing screw, use a plastic lever to remove the handle cover located on the right: unlock the handle before removing the cover. Pull the handle out from the car's body, compare it with the new handle, and prepare for installation. Remove the entire cover panel if the car does not have the side disassembly provision.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Door Handle of the Car
Removing the External Door Handle of the Car
(Various brands) Various Need to remove the external door handle of the car? Start by prising it off from above the door. Use a plastic or metal lever to pry between the wind…
How to dismantle the front door lock mechanism of the Piaggio Porter
How to dismantle the front door lock mechanism of the Piaggio Porter
(Various brands) Various To remove the front door of the Piaggio Porter, as shown in the video, you need to remove the door lock clip by unscrewing the cap. Next, remove the …
Removing the External Door Handle
Removing the External Door Handle
(Various brands) Various Is the external door handle damaged? Here’s how to remove and replace the handle. Open the car door, then unscrew the screws on the plastic trim of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos