Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Windscreen on a Scooter

Model: (Various brands) Various

If you want to install a windscreen on a scooter, you can find the instructions below and also refer to the video. After purchasing the aftermarket accessory, take the windscreen and insert the rubber grommets into the mounting holes. Typically, there are 4 mounting holes for the fairing; the two lower ones will be fixed in the holes under and to the sides of the headlight, while the other two upper ones attach to the mirror arms. At this point, position the fairing and secure it with the screws provided in the mounting kit.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Windscreen from a T-Max 500 Scooter
How to Remove the Windscreen from a T-Max 500 Scooter
(Various brands) Various Removing the windscreen from the T-Max 500 scooter has never been so simple thanks to our video tutorial that will show you how to perform this strai…
How to Fit an Isotta Windscreen on a Kymco?
How to Fit an Isotta Windscreen on a Kymco?
(Various brands) Various If you need to fit a winter windscreen on a Kymco scooter, you will find the necessary instructions for the installation in the video and in the desc…
How to Fit a Fabbri Windscreen on an Aprilia
(Various brands) Various If you intend to fit a windscreen on your scooter yourself, follow the instructions below and refer to the video. Identify the various components of …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos