Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Seat of the Piaggio Beverly 300 Without the Battery

Model: (Various brands) Various

If you need to open the seat of your scooter in case the battery is flat, the following description shows how to proceed and what operation to perform to achieve the result, and you can also refer to the video tutorial. First, insert the key into the ignition lock and do not turn the key but press it. This will open the flap at the base of the seat. Underneath, there is a lever that you need to pull all the way until you hear the unlocking sound. This way, you will have unlocked the rear luggage compartment. At the bottom of the luggage compartment, you will find the release latch for the seat, which you can then open manually.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Seat of the Piaggio Beverly 300 Without the Battery
How to Open the Seat of the Piaggio Beverly 300 Without the Battery
(Various brands) Various .. In this video, you will learn how to open the seat of the Piaggio Beverly 300 without the battery. The operation is very simple. Once.. …
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
How to Reset the Service Light on Piaggio Beverly 300/400 HPE
(Various brands) Various Resetting the service light on Piaggio Beverly 300/400 HPE models is a very simple operation. Start by placing the scooter, turned off, on its stand …
How to Set the Clock on Beverly 300 Scooter
How to Set the Clock on Beverly 300 Scooter
(Various brands) Various In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle i…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos