Do it yourself
Frequently asked questions about cars and motorcycles

How to Install a Battery in a Scooter

Model: (Various brands) Various
Part: Battery

In this video tutorial, you can see how to install a battery in a scooter. The first thing to do is take a star screwdriver and start unscrewing the screws found in the white plastic cover near the metal footboard of the scooter. Once the white plastic cover is removed, you will find the battery. Unscrew the battery terminal screws (positive and negative) with a star screwdriver. Once you have disconnected the battery terminals, you need to remove the battery from its compartment and replace it with a new one. Reassemble all parts in reverse order.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this tutorial video, you will see how to replace the battery on a Kymco 125 scooter: the first step is to purchase a new battery with the same amp…
(Various brands) Various In this tutorial, you will see how to replace the battery in the remote control of an Aprilia scooter, a very simple and quick operation. You will ne…
(Various brands) Various In this video tutorial, you will see how to remove the rollers from the variator of a generic scooter. The procedure may vary from scooter to scooter…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos