Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Coolant

Model: (Various brands) Various
Part: Antifreeze coolant

Video tutorial

Removing the coolant from your vehicle is a straightforward task that you can do yourself, thanks to our new video tutorial. The first step is to open the bonnet and use a screwdriver to remove the clip securing the reservoir hose, as shown in the video.

Once the hose is removed, place it inside a rubber tube, open the reservoir cap, and pour water into the reservoir. Start the engine and let the liquid flow out. Finally, reinsert the hose into the reservoir attachment and add the new coolant, then close the cap.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

(Various brands) Various Open the bonnet and prop it up with the support rod. Place a collection tray under the engine bay. Once you locate the coolant pipe, check if it has …
(Various brands) Various Checking the level and topping up the antifreeze is a task that should be performed periodically on all cars, especially older and high-mileage ones.…
(Various brands) Various If you need to top up the coolant on your scooter, you can find instructions on how to proceed in the description below and in the video. First, use …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos