Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What are Fuses Used For?

Model: (Various brands) Various
Part: Fuse box

This video explains in simple terms what fuses are used for: in an electrical circuit, on one side we have a load (e.g., a light bulb) and on the other side, a generator (e.g., the car battery). In between, there is a switch. When the switch is closed, current flows and the light bulb lights up, but if the positive and negative wires touch, there is a short circuit and the bulb blows, which can also cause a fire. However, in these cases, we have our fuse upstream of the switch, which breaks the conductive material inside, opening the circuit and preventing all this danger: The YouTuber shows how a fuse burns out.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

What are glow plugs really used for in a diesel engine?
What are glow plugs really used for in a diesel engine?
(Various brands) Various Let's debunk a myth: glow plugs on modern diesel engines are not really necessary for ignition, or at least not specifically just for that, but are m…
What are spacers used for, and if installing them has any benefits
What are spacers used for, and if installing them has any benefits
(Various brands) Various In this video we talk about spacers: what they are used for and if installing them brings any benefits. Supercars are usually low and wide, this is b…
What Are Fuse Taps Used For?
What Are Fuse Taps Used For?
(Various brands) Various Fuse taps are very useful accessories for adding electrical circuits to your car's fuse box easily and safely, without cutting or stripping original …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos