Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Car Fuse

Model: (Various brands) Various
Part: Fuse box

Video tutorial

How to replace damaged fuses in your car? First, locate the fuses and how to replace them. Open the door and enter the vehicle, then remove the cover under the steering wheel using a plastic lever.

In many types of cars, the fuses are located in the right glove compartment. Use needle-nose pliers to pull out the damaged fuses from the compartment.

Once this is done, insert the new fuses into the designated slots in the compartment. After replacing them, close the fuse inspection box with the cover.

Test the proper functioning of the car by turning on the ignition with the appropriate key. Replace all damaged fuses.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

(Various brands) Various Today, we will see how to check the status of a car fuse. Inside the vehicle, there are usually two fuse boxes, located in the cabin and under the bo…
(Various brands) Various The main cause of malfunction in an electrical component of the car is a blown fuse related to that component. For example, it is common for the radi…
(Various brands) Various The replacement of the bulb of the interior light fixture on a vehicle follows some simple and quick steps to be carried out independently. We start …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the washer pump fuse located? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What to do when your car air conditioning fuse is blown? Read answer
    • Vari - Where is the fuse of a RV refrigerator located? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer
    • Vari - Where is the tailgate fuse located? Read answer
    • Vari - Where is the battery alternator fuse located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos