Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Car Locked from the Inside with a Flat Battery

Model: (Various brands) Various
Part: Key

If your car is locked from the inside, the lock is damaged, and the battery is flat, preventing you from opening it with the remote - a true compilation of misfortunes - there is a method to open it without breaking any glass and without calling a locksmith. You will need a piece of wire that is not too thin and some plastic spatulas. Use the spatulas to create an opening in the door seal of the driver's side without damaging it, while the wire should be bent into a hook to catch the internal handle to unlock it. Where the wire runs, place some adhesive tape to avoid damaging the bodywork.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Start a Car with a Flat Battery
How to Start a Car with a Flat Battery
(Various brands) Various In this video tutorial, you will learn how to start the engine of your car with a flat battery; this procedure can be applied to any type of vehicle.…
How to Change the Car Remote Battery
How to Change the Car Remote Battery
(Various brands) Various How do you change the battery in the car remote? Here’s how to replace the flat battery inside the plastic key fob. Take your remote key and, using a…
How to Repair a Broken Antenna
How to Repair a Broken Antenna
(Various brands) Various In this video, you will learn how to repair the antenna of your vehicle if it has broken off on the roof. The piece may be stuck inside: what should …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos