Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to start the car when the remote control car battery is dead

Model: (Various brands) Various
Part: Key

When the battery of the car remote control is low on vehicles with keyless entry, it becomes almost impossible to start the engine. For this reason, we will explain to you the trick to use to start the engine. Get into the car and place the remote control vertically near the engine start button. Press the button using the remote control and press the accelerator pedal, this way the car will start. Go to the nearest auto parts store to purchase a new CR 2032 3 Volt battery for the remote control. After replacing the battery, the remote control will not have any further issues.

Posted on 11 July 2025 by ScegliAuto

Video tutorial

Related tutorials

What to Do When the Remote Control Doesn't Work
What to Do When the Remote Control Doesn't Work
(Various brands) Various In this video, we can see how to handle it if the remote control of your vehicle suddenly stops working. The most likely cause in this case is that t…
How to Open the Door When the Remote Battery is Dead
How to Open the Door When the Remote Battery is Dead
(Various brands) Various It may happen that you are in a hurry and the remote for your vehicle has a dead battery. You might not have the time to find a shop for a new batter…
How to Open Your Car Without the Remote
How to Open Your Car Without the Remote
(Various brands) Various It can happen to be left with a flat car remote. This situation is not only very unpleasant but also problematic, as you may not be able to enter you…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos