Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft Oil Seal?

Model: (Various brands) Various
Part: Checks and maintenance

To replace the crankshaft oil seal, first remove the engine block from its housing by loosening the mounting bolts and disconnecting pipes and connectors. At this point, you can remove the nuts securing the flywheel to the crankshaft and access its rear. Using a tool like a screwdriver, you can pry out the oil seal from its housing and replace it with a new one. After replacement, reassemble the flywheel and refit the engine block in its place.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install a Oil Seal
How to Install a Oil Seal
(Various brands) Various In this guide, you will learn how to install an oil seal. First, you need to remove the old ones. To do this, insert a flat-head screwdriver between …
How to Remove the Camshaft Oil Seal?
How to Remove the Camshaft Oil Seal?
(Various brands) Various The video author demonstrates his method for removing the camshaft oil seal without disassembling the entire affected area. The YouTuber, as we can s…
Instructions for Replacing the Engine Oil Seal
Instructions for Replacing the Engine Oil Seal
(Various brands) Various In this video, you will learn how to replace the engine oil seal on a generic car. To replace it, access the underside of the car and remove all obst…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos