Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Piaggio Porter

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

In today's video, you will see how to service the Piaggio Porter, specifically how to perform an oil change and replace the filter. First, remember to carry out maintenance according to the recommended schedule in the owner's manual.

Next, lift the vehicle on a ramp and place a collection tray underneath. Allow the fluid to drain completely, then reinsert the oil sump; simultaneously, remove the oil filter from the vehicle.

Then, refill the fluids according to the manufacturer's specifications, and complete the current task.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Change the Oil in a Piaggio Porter
How to Change the Oil in a Piaggio Porter
(Various brands) Various To change the engine oil in a Piaggio Porter, lift the vehicle for easier access. Next, position a fluid collection tray under the oil drain plug. On…
How to dismantle the front door lock mechanism of the Piaggio Porter
How to dismantle the front door lock mechanism of the Piaggio Porter
(Various brands) Various To remove the front door of the Piaggio Porter, as shown in the video, you need to remove the door lock clip by unscrewing the cap. Next, remove the …
How to Reset the Service Light on a Piaggio MP3 Yourban
How to Reset the Service Light on a Piaggio MP3 Yourban
(Various brands) Various The procedure to reset the service light on a Piaggio MP3 Yourban is very simple and will take just a few seconds of your time, but it will help elim…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos