Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery in a universal car remote

Model: (Various brands) Various
Part: Key

You may have wondered if there is a universal car remote, and yes, there is. It functions just like a regular car remote. You will need to replace the battery when necessary and reprogram it if needed. Today, we will explain how to replace the battery. First, take the remote and use a small cross-head screwdriver to unscrew the 2 securing screws. Once the screws are removed, open the remote as shown in the video. After opening, remove the central body and slide out the old battery, insert the new one, and close it.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various You may have wondered if a universal car remote exists, and yes, it does. It behaves like a regular remote, so you will need to replace the battery w…
(Various brands) Various Remove the universal antenna from your car. Take off the interior light or the trim panel at the rear of the car (depending on whether the antenna is…
(Various brands) Various How do you change the battery in the car remote? Here’s how to replace the flat battery inside the plastic key fob. Take your remote key and, using a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos