Do it yourself
Frequently asked questions about cars and motorcycles

What to Do If the Car Overheats

Model: (Various brands) Various
Part: Engine

Video tutorial

Why does the engine overheat, and is there a way to get going again? We explore this in the video. The first reason is obviously a malfunctioning fan; especially in traffic, the radiator cannot dissipate heat and the vehicle overheats.

There can be several reasons for this: a blown fuse, a seized fan, or damaged wiring. If the thermostat is stuck, the remedy is to set the heating to maximum temperature, as the internal radiator draws water from the coolant without passing through the thermostat, helping to lower the temperature.

Another thing to do is maintain a constant speed to allow air into the radiator; turning off the engine would be much worse, as Ema illustrates in the video. Another case: lack of coolant due to a radiator leak.

There are products called "stop leak" to use in extreme cases. If the water pump has broken, you need to call a breakdown service.

If you open the expansion tank when the car is overheating, be aware that it is very, very dangerous.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various Brake fluid is an incompressible liquid that acts on the disc brake piston. It consists of polyhydric alcohols and esters that have a high boiling po…
(Various brands) Various In this video, we will see the strategy to follow if the cooling system is in the red range of the gauge, meaning close to boiling. In this case, the…
(Various brands) Various What the YouTuber tells us is correct: brake fluid is hygroscopic, meaning it naturally absorbs moisture from the air through the microporosity of th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos