|
Do it yourself
| |||
| ||||
Why the Door Open Warning Light Remains On Even When Closed
Model: (Various brands) Various
In this video, see what causes the door open warning on a vehicle when it is properly closed. The most common problem is the door switch; in this vehicle, it is located on this side, but sometimes it can be found on the door itself, so check both, and in newer vehicles, it is integrated into the door latch. In many cases, the issue could be the wiring itself, or the switch may have rusted. Replacing it is very simple; just remove the screw and find the switch underneath: disconnect it by removing the electrical connection, ensuring the wire does not fall into the bodywork (as it would be very difficult to retrieve). The new switch can easily be found on any e-commerce site, depending on your vehicle, and costs just a few pounds. Then, simply reconnect it to the connector and replace the screws.
Updated on 20 September 2026 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
In this video, our YouTuber explains how to easily fix the airbag warning light that stays on (for no reason, mind you) even after the ignition is tu…
(Various brands) Various
Let's look at the symptoms of a faulty EGR valve, which vary depending on whether the valve is stuck open or closed. In the first case (which is the …
(Various brands) Various
In this video, you will see why the engine oil light comes on: the reason is insufficient oil pressure in the lubrication system. When you start the …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Battery on a Honda Vision 110
To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.344
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |