Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Shock Absorber

Model: (Various brands) Various
Part: Shocks

First, lift your vehicle and place it on suitable axle stands. Now, remove the relevant wheel and apply a suitable fluid to ease the process. Remove any pipes connected to the shock absorber. Next, remove the bolts indicated in the video to gradually free the damaged suspension parts. Apply pressure under the brake disc to avoid damaging other areas of your vehicle. Now, remove the bolts from the top of the suspension, and you can extract it from the bottom.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video tutorial, see how to change the front shock absorber on a Vespa 50. The first step is to purchase a new shock absorber; the next step i…
(Various brands) Various In order to replace the rear shock absorber of a Piaggio, you need to open the underseat compartment: this way you will be able to locate the screws …
(Various brands) Various When replacing the shock absorbers, it is advisable to have the shock absorber springs checked and possibly replaced as they are responsible for supp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos