Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

If the ABS light is on, maybe the sensors are just dirty.

Model: (Various brands) Various
Part: Warning light – error code

In this video we see that sometimes we rush to change parts when it is sufficient to clean them and put them back in place. When the ABS light comes on, we are used to thinking that we need to change the sensors, but very often the sensors - which are actually located in a place where they can easily get dirty - just need to be cleaned and can be put back in place more efficiently than before. To remove them, we need to go behind the wheel, disconnect the electrical connection and then, after unscrewing them, remove them from their housing. The dirt that accumulates on them falsifies the signals that the sensor sends to the control unit. A little WD-40 will be providential. Then just screw them back in and reconnect them, and the light will turn off.

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How a dirty wheel speed sensor can trigger the ABS warning light.
How a dirty wheel speed sensor can trigger the ABS warning light.
(Various brands) Various In this video, we can see how the speed sensor of a wheel, if dirty, can affect the activation of the ABS warning light on our vehicle. In fact, thes…
How to fix an ABS error
How to fix an ABS error
(Various brands) Various In this video, we see an effective procedure for older cars to solve ABS problems. This system works thanks to sensors that read the speed of each wh…
What to do when the glow plug light comes on
What to do when the glow plug light comes on
(Various brands) Various When the glow plug warning light comes on the dashboard of our diesel car, how should we behave? Glow plugs are used to heat the combustion chamber, …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the spring-shaped indicator light indicate? Read answer
    • Vari - What does error code 46 represent on the Yamaha Xmax? Read answer
    • Vari - What does the Ligier battery light indicate? Read answer
    • Vari - What does the check engine light on the Sym scooter mean? Read answer
    • Vari - What does the "CL 0-7A" error mean in the Kymco Agility scooter? Read answer
    • Vari - Why did the orange engine failure light come on in the Ligier JS50? Read answer
    • Vari - What does the error code 46 mean in the Yamaha T-MAX 500 scooter? Read answer
    • Vari - What does the abs light on the Yamaha Xmax 125 moped indicate? Read answer
    • Vari - What does the flashing red light on the Piaggio Beverly 300 instrument panel indicate? Read answer
    • Vari - What does the flashing ABS light on the Piaggio Liberty 125 mean? Read answer
    • Vari - What does the Piaggio Beverly 300 engine warning light indicate? Read answer
    • Vari - What does the Benelli TRK 502 engine warning light mean? Read answer
    • Vari - What does the coolant warning light mean? Read answer
    • Vari - What does the "Met in" light on Kymco scooters mean? Read answer
    • Vari - What does the Sym Symphony 125 engine warning light mean? Read answer
    • Vari - What do the red lights on a truck mean? Read answer
    • Vari - What does the disA light mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos