Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light

Model: (Various brands) Various
Part: Tail light

First, open the tailgate using the appropriate handle to lift it. This will allow you to remove the carpet at the top corner, where the plugs of your vehicle are located. Disconnect it and move the cable away. Now, unscrew the plastic screws to detach the light, which you can then pull out from the rear. After this, simply detach the cover at the back to replace the necessary parts, and that's done! Retrace the described steps in reverse for reassembly of the various components.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various How do you remove the rear light and replace the bulbs? Start by lifting the boot. Locate the trim on the side of the compartment. Remove the fabric …
(Various brands) Various Replacing the bulb of the left rear headlight of the car is a very simple and quick operation to perform independently, and this operation is similar…
(Various brands) Various If you want to replace the rear light on this scooter model, the description and video provided will give you all the information and useful steps to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos