Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset a tire pressure sensor

Model: (Various brands) Various
Part:

In this video we can see how to reset the tire pressure monitoring system (TPMS). Since 2012, all cars are equipped with the pressure monitoring system to alert the driver of any problems, but once the issue is resolved, the sensor remains activated and must be manually disconnected. To disconnect it, we must follow these steps: turn on the ignition, press the TPMS reset button, which is usually located under the steering wheel, then press and release the brake pedal. This is a standard procedure: if it doesn't work, we will need to consult the owner's manual of our vehicle.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How the Tyre Pressure Sensor Works
How the Tyre Pressure Sensor Works
(Various brands) Various In this video, you can see how the tyre pressure warning light works. If the tyre pressure warning light (!) comes on, it means that one tyre is losi…
How to replace the vehicle's tire pressure sensor
How to replace the vehicle's tire pressure sensor
(Various brands) Various Today we will explain how to independently replace the tire pressure sensor on the wheels of a vehicle. The sensors must be replaced when they stop w…
How to replace the tire pressure sensor on a vehicle
How to replace the tire pressure sensor on a vehicle
(Various brands) Various Today we will explain how to replace the tire pressure sensor on a vehicle. We start by removing the tires from their seat, then we lift the car and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos