Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Release Button on the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Push button

See other generations:
Video tutorial

This guide shows you how to remove and replace the rear boot release button on the Volkswagen Jetta. First, open the boot and start unscrewing the two screws securing the boot panel using a Torx screwdriver; then unscrew the screws of the release button, disconnecting the electrical connector to remove it, as shown in the video.

At this point, install the new rear boot release button, finally reassembling the plastic inner panel!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light on a Volkswagen Jetta
How to Replace the Rear Light on a Volkswagen Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) If you need to replace a light in the rear light cluster of this vehicle, follow the instructions provided below and in the video. After opening the …
How to Remove the Rear Tailgate of a Volkswagen Jetta
How to Remove the Rear Tailgate of a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the main instructions on how to remove and replace the rear tailgate of the Volkswagen Jetta. First, open the rear tailgate and start remov…
Replacing the Boot Lid on a Volkswagen Jetta
Replacing the Boot Lid on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) These brief steps will guide you on how to disassemble and replace the boot lid on a Volkswagen Jetta. First, open the boot lid and start disconnecti…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos