Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump of the Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Pump

In order to replace the water pump on the Volkswagen Golf, you need to open the hood so that you can locate the components inside the engine compartment: on the left side of the block, you will find the pump. The pump can be removed from its seat by unscrewing the screws that hold it in place and then it will also be necessary to disconnect the pipes and remove the belt from its pulley: in this way you can completely remove the old pump, inserting the new one. The new pump can now be properly installed to ensure that everything is working.

Posted on 19 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Volkswagen Golf 3?
How to Replace the Water Pump on a Volkswagen Golf 3?
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) To replace the water pump on a Volkswagen Golf 3, open the bonnet to remove the cover from the top of the engine. Additionally, since the water pump …
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
How to Replace the Water Pump on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Below is the guide showing the procedure for removing and replacing the water pump on a Volkswagen Golf 1.4 TSI. First, open the bonnet of the vehicl…
Replacing the Water Pump on VW Golf 5
Replacing the Water Pump on VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Replace the water pump on the Golf 5. Remove some components from inside the engine bay to access the water pump. Lift the front bonnet of the car to…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos