Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulbs on the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

Today's information will show you how to disassemble and replace the number plate bulbs on the Volkswagen Jetta. First, move to the rear and begin to pry the sides of the light unit using something thin and pointed; then disconnect the electrical connector for the lights to remove and replace the bulb (with the same fitting), as shown in the video.

Refit the light unit onto the bodywork, replacing the other number plate light in the same manner if necessary, following the video tutorial to the end!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light on a Volkswagen Jetta
How to Replace the Number Plate Light on a Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To correctly replace the number plate light on your new Volkswagen Jetta Mk7, follow the steps outlined in this mini guide. First, ensure the car is …
How to Replace the Number Plate Light Bulb in the Volkswagen Jetta?
How to Replace the Number Plate Light Bulb in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial, you will learn how to replace the number plate light bulb in the Volkswagen Jetta, an extremely simple and quick task. First, ensur…
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot li…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos