Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulb in the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the number plate light bulb in the Volkswagen Jetta, an extremely simple and quick task. First, ensure that the key is not inserted to operate safely.

Then, open the boot and, preferably using a plastic spatula to avoid leaving marks, pry out the first bulb holder by leveraging the left edge. Next, disconnect the power connector, fit the replacement, and reassemble everything.

Finally, repeat the operation on the opposite side if necessary.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light on a Volkswagen Jetta
How to Replace the Number Plate Light on a Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To correctly replace the number plate light on your new Volkswagen Jetta Mk7, follow the steps outlined in this mini guide. First, ensure the car is …
How to Replace the Number Plate Bulbs on the Volkswagen Jetta
How to Replace the Number Plate Bulbs on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's information will show you how to disassemble and replace the number plate bulbs on the Volkswagen Jetta. First, move to the rear and begin to…
Number Plate Light Replacement Instructions
Number Plate Light Replacement Instructions
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the number plate lights, unclip the lamp holders located at the side of the rear hatch handle; once the hatch is open, locate the side tab…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos