Do it yourself
Frequently asked questions about cars and motorcycles

Number Plate Light Replacement Instructions

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

To replace the number plate lights, unclip the lamp holders located at the side of the rear hatch handle; once the hatch is open, locate the side tab securing the lamp holder and press it with a flat screwdriver to release it; at this point, disconnect the power connector and remove the old bulb (T10 fitting) and replace it with a new one; reconnect the power connector and reposition the lamp holder in its place; repeat the same steps for the other bulb.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2010-2018 / MK 6, A6) Today's information will show you how to disassemble and replace the number plate bulbs on the Volkswagen Jetta. First, move to the rear and begin to…
Volkswagen Jetta (2018-2025 / A7, MK 7) To correctly replace the number plate light on your new Volkswagen Jetta Mk7, follow the steps outlined in this mini guide. First, ensure the car is …
Volkswagen Jetta (1998-2005 / A4, MK 4) If the gear lever tends to stick during gear changes, it is likely that there is play in the coupling between the pin and the plate that supports the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos