|
Do it yourself
| |||
| ||||
How to Remove the Cooling Radiator from a Volkswagen Golf
Model: Volkswagen Golf
Golf IV, Golf 4, MK 4
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003
Video tutorial
In this video, we explain how to remove the cooling radiator from a Volkswagen Golf. Open the bonnet, detach the engine soundproofing panel, then use a suitable socket wrench to remove the plates that secure the radiator at the top. Lift the car on a column lift and loosen the clamp on the water hose. Disconnect the various hoses of the cooling system with pliers. Once free from screws and pipes, you can extract the fan assembly and then the radiator from the engine bay. Prepare to install the new part in the engine bay: fit the cooling fans, clamps, pins, and various pipes. Reattach the radiator's mounting brackets with the associated plates. Tighten the plastics and the front cover securely with a socket wrench. Finally, top up with new coolant and bleed the air from the cooling system.
Updated on 27 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
How do you remove the radiator and cooling fans from a Volkswagen Golf Mk5? Open the front bonnet, detach the engine soundproofing panel, then use a …
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
In this guide, you will find the main instructions that will allow you to remove and replace the cooling radiator on a Volkswagen Golf 5 GTI. First, …
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
How to remove the radiator and cooling fan from a Volkswagen Golf 4? Open the bonnet, and using a suitable socket spanner, remove the plates that sec…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |