Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

To carry out this task safely, disconnect the battery cables and lift the rear of your vehicle, as the filter is located underneath. Once you locate the filter, disconnect the connectors that supply the various sensors.

Next, remove the pipes that carry the diesel, and have a container ready to collect any fluid that may spill. This way, you can extract the old filter.

Reverse the steps described for reassembling the various components.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on a Volkswagen Polo 1.6 TDI
Replacing the Fuel Filter on a Volkswagen Polo 1.6 TDI
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In today's tutorial, you will learn how to remove and replace the fuel filter on a Volkswagen Polo 1.6 TDI in simple steps. First, open the engine bo…
How to Replace the Fuel Filter on the Volkswagen Polo 1.6 TDI
How to Replace the Fuel Filter on the Volkswagen Polo 1.6 TDI
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Below are the instructions that will allow you to remove and replace the fuel filter on the Volkswagen Polo 1.6 TDI. First, open the bonnet and locat…
How to Remove the Diesel Filter on a VW Polo
How to Remove the Diesel Filter on a VW Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Replace the damaged diesel filter on a VW Polo. First, lift the front bonnet of the engine and locate the diesel filter. Use a pair of pliers to disc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos