|
Do it yourself
| |||
| ||||
Removing Front Headlights from a Volkswagen Passat
Model: Volkswagen Passat
B7
- Years:
2010, 2011, 2012, 2013, 2014
Video tutorial
Remove the headlights from a Volkswagen Passat along with the front bumper. First, lift the bonnet and secure it. Using a socket or battery-powered screwdriver, undo the securing bolts for the front bumper located at the top as shown in the video. Once this is done, undo the bolts on the wheel arch liners and finally remove the bolts at the bottom of the bumper. Carefully pull the bumper away from the vehicle body. Now, undo the securing bolts on the headlight bracket using a socket or battery-powered screwdriver. At the bottom of the headlight, you will find additional bolts; remove them from the metal plates (repeat this for both headlights). Disconnect the bulb holder from the headlight and pull the headlight out of the vehicle body. Fit the new headlight with new bulbs if damaged (ensure they are the correct type and size) and insert the headlight into its housing. Finally, tighten the bolts around the headlight and refit the bumper. Test the lights to ensure they are functioning correctly.
Updated on 27 February 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(1996-2005 /
3BG, B5)
Today, you will learn how to remove the front headlights on a Volkswagen Passat B5 by following the instructions below. Open the bonnet of your car a…
Volkswagen Passat
(2010-2014 /
B7)
In this tutorial, we can see how to replace the front headlight bulbs in a Volkswagen Passat, a very simple and quick operation. First, ensure that t…
Volkswagen Passat
(2010-2014 /
B7)
In this tutorial, we will see how to replace the headlights in a Volkswagen Passat, a process that is extremely simple and quick. First of all, let's…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.096
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |