Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre warning light on a Volkswagen Polo, turn on the ignition without starting the engine and use the central touchscreen to access the vehicle settings. From the main menu, navigate to the section related to tyre pressure or TPMS monitoring.

Here, you will find the option to reset the system. Tap this option and follow the on-screen instructions to confirm the reset procedure.

The system may take a moment to register the new configuration and turn off the light. Once the operation is complete, check the correct functioning by turning off and then on the ignition.

If the light does not appear again, the reset has been successful and the pressure monitoring is updated, ready to detect any future changes.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Volkswagen Polo
How to Reset the Tyre Pressure Light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) You can completely eliminate the tyre pressure light on the Volkswagen Polo by inflating the tyres until they reach the recommended pressure value. T…
How to reset the tyre warning light on the Volkswagen Polo?
How to reset the tyre warning light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will see how to reset the tyre warning light on the Volkswagen Polo, a very simple and quick operation to perform only after re…
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Before you begin, sit in the driver's seat of your Volkswagen Polo. Start by pressing and holding the button located beneath the speedometer. At the …

    Frequently Asked Questions

    • Polo 2017-2025 - How do you reset the Volkswagen Polo tire pressure warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos