Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Volkswagen New Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

How to remove and refit the front headlamp of a Volkswagen New Beetle. To begin: lift the bonnet, reach into the engine bay, and (specifically at the back of the headlamp) pull the plastic lever upwards (the headlamp will magically detach from its housing).

Disconnect the power connector and replace any damaged bulbs or the entire unit. The reassembly phase is very simple: slide the headlamp into its housing as shown in the video and lower the previously lifted lever until the headlamp clicks into place.

Finally, test the operation of the lights.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp on a Volkswagen New Beetle
How to Remove the Front Headlamp on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In today's tutorial video, we will go through the steps to remove the front headlamp and replace the bulb on a Volkswagen New Beetle. First, open the…
How to Replace the Front Headlamp Bulb on the Volkswagen New Beetle?
How to Replace the Front Headlamp Bulb on the Volkswagen New Beetle?
Volkswagen New Beetle (2011-2018 / MK 3) To replace the front headlamp bulb on the Volkswagen New Beetle, open the bonnet to access the components inside the engine bay: at the back of the h…
How to Remove and Replace the Front Headlamp on a Volkswagen New Beetle
How to Remove and Replace the Front Headlamp on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Here are the main instructions for removing and replacing the front headlamp assembly on a Volkswagen New Beetle in simple and quick steps. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos