Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" indicator on a Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Service warning light

To reset the "Service" light on a Volkswagen Golf, turn on the instrument panel without starting the engine. Find the button located under the instrument panel, usually on the right side of the dashboard. Press and hold the button while turning off and then turning back on the instrument panel. During this operation, a message will appear on the display asking you to confirm the maintenance interval reset. At this point, release the button and, if necessary, press it again to complete the procedure. The "Service" light should turn off, indicating that the reset has been performed correctly. It is important to ensure that the oil change and general check-up have been carried out before proceeding with the reset, so that the system can properly monitor the new maintenance intervals. If you encounter difficulties or the light remains on, consult the vehicle's user manual or seek support from an authorized workshop to verify the correct functioning of the system.

Posted on 9 January 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the "Service" light on a Volkswagen Golf, turn on the instrument panel without starting the engine. Use the controls on the steering wheel t…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Before you start, sit in the driver's seat of your Volkswagen Golf. Begin by pressing and holding the right button on the instrument cluster while ac…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the "Service" light on a Volkswagen Golf, start by turning on the instrument panel without starting the engine. Press and hold the button lo…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos