Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

How do you remove the front bumper on a Volkswagen Polo? This operation is not too complex if done methodically. First: open the bonnet by pulling the bonnet release lever and secure it with the prop rod. Unscrew the screws located at the bottom of the bumper, then remove the screws on the sides of the wheel arch liners.

Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any power cables). Finally, fit the new bumper by following the disassembly steps.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Volkswagen Polo
How to Remove the Front Bumper of the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this guide, find the main instructions on how to remove and replace the front bumper of the Volkswagen Polo. First, open the bonnet of your car an…
How to remove the front bumper of the Volkswagen Polo
How to remove the front bumper of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, discover the steps to remove and replace the front bumper of the Volkswagen Polo. First, open the bonnet of the vehicle and begin unsc…
How to disassemble the front bumper of the Volkswagen Polo
How to disassemble the front bumper of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this short guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Volkswagen Polo. First, we op…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos