Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the rear bumper of the Volkswagen Passat B8 2015

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Rear bumper

In the following guide, we will explain all the steps you need to follow to remove the rear bumper of your Volkswagen Passat b8 (2015). First of all, make sure the car is turned off, then lift the front hood and proceed with the removal of both headlights. Once you have done that, locate all the screws around the perimeter of the front hood, both in the upper and lower and side areas. Use a specific key to unscrew them and remove the two safety hooks located at the bottom of the bumper. Finally, disassemble the bumper and you're done.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Volkswagen Passat
How to Remove the Rear Bumper on a Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) This tutorial demonstrates how to remove the rear bumper on a Volkswagen Passat B6, a very simple and quick operation. First, go to the underside of …
How to Remove the Rear Bumper on a Volkswagen Passat Variant B8
How to Remove the Rear Bumper on a Volkswagen Passat Variant B8
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In today's video, you will see step-by-step instructions to remove the rear bumper on a Volkswagen Passat B8, eighth generation. First, open the boot…
How to disassemble the rear bumper of the 2018 Volkswagen Passat
How to disassemble the rear bumper of the 2018 Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Disassembling the rear bumper of your Volkswagen Passat (2018) may seem like a very complex operation, but in reality you just need to follow the ste…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos