Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear bumper of the Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Rear bumper

Today we will discover the instructions that will allow us to disassemble and replace the rear bumper of the Volkswagen Passat. First, we open the rear hatch of the trunk and start unscrewing all the fastening screws we find on the top and bottom of the bumper; then we unscrew the additional screws located on both sides of the rear wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with a new one; we then reassemble and properly secure the bumper to the body!

Posted on 30 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper on a Volkswagen Passat B6
Removing the Front Bumper on a Volkswagen Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) In this video tutorial, we will see the instructions that will allow us to remove and replace the front bumper on a Volkswagen Passat B6. First, open…
Remove Front Bumper from a VW Passat
Remove Front Bumper from a VW Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Removing the bumper from a Volkswagen Passat, let's see how. Lift the front bonnet of the car, remove the front grille located at the centre of the b…
How to Remove the Rear Bumper on a Volkswagen Passat Variant B8
How to Remove the Rear Bumper on a Volkswagen Passat Variant B8
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In today's video, you will see step-by-step instructions to remove the rear bumper on a Volkswagen Passat B8, eighth generation. First, open the boot…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos