Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the EGR valve of the Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve installed on board the Volkswagen Golf, you will need to open the hood so that you can access the components inside the engine compartment: this way you will be able to locate the exhaust manifold at the rear of the engine block itself.

Here you will find the valve that needs to be removed from its seat by loosening the screws and disconnecting all the connectors; at this point you will need to place the new valve in its seat so that it can be secured with the screws and connect the connectors, checking for correct operation.


Posted on 16 February 2025 by ScegliAuto


Related tutorials

How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First…
Replacing the EGR Valve on Volkswagen Golf 5
Replacing the EGR Valve on Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the EGR valve can cause various issues in the vehicle such as injection problems and loss of power. First, secure the vehicle by engag…
How to Replace the EGR Valve on the Volkswagen Golf 1.6
How to Replace the EGR Valve on the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, we will see how to disassemble and replace the EGR valve on the Volkswagen Golf 1.6, following the instructions below. First, open the…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos