Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the EGR Valve on Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: EGR valve

See other generations:
Video tutorial

The failure of the EGR valve can cause various issues in the vehicle such as injection problems and loss of power. First, secure the vehicle by engaging the handbrake and turning off the engine, then open the bonnet.

The EGR valve is located at the top left of the engine; to access it, remove the engine cover. Disconnect the air intake duct.

Once the duct is removed, you can take out the solenoid valve using a 5 mm spanner. After removing the screws, detach the valve.

Now you have access to the EGR valve, so remove the pipe that operates the valve. Once the worn EGR valve is removed, clean the area thoroughly and replace it with a new EGR valve.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First…
How to Replace the EGR Valve on the Volkswagen Golf 1.6
How to Replace the EGR Valve on the Volkswagen Golf 1.6
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this guide, we will see how to disassemble and replace the EGR valve on the Volkswagen Golf 1.6, following the instructions below. First, open the…
Replacing the EGR Valve on a Volkswagen Golf 1.4 16V
Replacing the EGR Valve on a Volkswagen Golf 1.4 16V
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The instructions in this guide will show you how to remove and replace (or clean) the EGR valve on a Volkswagen Golf 1.4 16V. First, open the bonnet …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos