Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the EGR Valve of a Volkswagen Golf 1.9 TDI?

Model: Volkswagen Golf Golf 4, MK 4, Golf IV - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: EGR valve

Video tutorial

The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First, open the bonnet of the vehicle and start disconnecting the exhaust gas recirculation pipe from the EGR valve; then disconnect the electrical connector of the valve and unscrew the fastening screws to remove it, as shown in the video.

At this point, clean or directly replace the EGR valve if damaged; reassemble and correctly connect the EGR valve, following the video tutorial to the end!


Posted on 14 October 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve on a Volkswagen Golf 6 1.6 TDi?
How to Remove the EGR Valve on a Volkswagen Golf 6 1.6 TDi?
Volkswagen Golf (2008-2012 / Golf VI, 5K1, Golf 6, MK 6) To remove the EGR valve on a Volkswagen Golf 6 1.6 TDi, open the bonnet to access the components inside the engine compartment. Once opened, locate t…
Removal and Cleaning of the EGR Valve on the Volkswagen Golf 5 1.4
Removal and Cleaning of the EGR Valve on the Volkswagen Golf 5 1.4
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) This guide explains the steps to remove and clean the EGR valve of the Volkswagen Golf Mk5 with a 1.4 petrol engine. First, open the bonnet and start…
Replacing the EGR Valve on a Volkswagen Golf 1.4 16V
Replacing the EGR Valve on a Volkswagen Golf 1.4 16V
Volkswagen Golf (1997-2003 / Golf 4, MK 4, Golf IV) The instructions in this guide will show you how to remove and replace (or clean) the EGR valve on a Volkswagen Golf 1.4 16V. First, open the bonnet …

How to reset the tyre warning light in the Jeep Avenger?

In this tutorial, you will learn how to reset the tyre warning light in the Jeep Avenger, a very simple and quick operation to perform only after restoring the correct pressure in each tyre. First, enter the cabin, then insert the key and turn on the ignition. Next, navigate to the general menu on the main display, go to "Settings", "Vehicle", "Safety", "Tyre Pressure Configuration", and perform the reset using the appropriate option. To complete the procedure, simply restart the ignition.

Watch the video!


by ScegliAuto

More videos