Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the EGR Valve on the Volkswagen Golf 1.6

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: EGR valve

See other generations:
Video tutorial

In this guide, we will see how to disassemble and replace the EGR valve on the Volkswagen Golf 1.6, following the instructions below. First, open the bonnet and start removing the intake duct of the valve; then disconnect the electrical connector of the sensor and use a ratchet spanner to unscrew the securing screws of the EGR valve, as shown in the video.

At this point, clean the valve, or opt for replacement if damaged; then reassemble everything, applying the reverse procedure!


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will illustrate the procedure for removing and possibly replacing (or cleaning) the EGR valve of a Volkswagen Golf 1.9 TDI. First…
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The failure of the EGR valve can cause various issues in the vehicle such as injection problems and loss of power. First, secure the vehicle by engag…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The instructions in this guide will show you how to remove and replace (or clean) the EGR valve on a Volkswagen Golf 1.4 16V. First, open the bonnet …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos