Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the Volkswagen Passat?

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Headlight bulb

In this tutorial we can see how to replace the front headlight bulbs in the Volkswagen Passat, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then lift the side on which we will work with the jack. Next, locate the small door located on the inner side of the wheel arch, open it and remove the large circular cap. At this point, we can disconnect the power connector, remove the old bulb by rotating it slightly counterclockwise and insert the replacement.

Posted on 19 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Headlight Bulb on VW Passat
Volkswagen Passat (2010-2014 / B7) Are the headlight bulbs on your car blown? Let’s look at removing the front headlight bulbs on a Passat. Lift the front bonnet of the car and locate …
Replace Front Headlight Bulbs on VW Passat
Replace Front Headlight Bulbs on VW Passat
Volkswagen Passat (2005-2010 / B6, 3C) Are the front headlight bulbs damaged? Here’s how to replace them on a Volkswagen Passat. Open the front bonnet by pulling the lever located at the b…
Replacing the Front Headlight Bulbs on Passat
Replacing the Front Headlight Bulbs on Passat
Volkswagen Passat (2005-2010 / B6, 3C) Are the front headlight bulbs blown? Let's see how to remove the bulbs once the position is found. Locate the inspection cap of the headlight (locate…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos