Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Bulbs/LEDs on a Volkswagen Jetta

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

See other generations:
Video tutorial

Learn how to remove and replace the bulbs/LEDs in the ceiling light of a VW Jetta. Using a screwdriver or plastic lever, pry between the ceiling light cover and its perimeter (without breaking the plastics), and pull out the bulbs that need replacing.

Replace the damaged bulbs with new ones (same size and voltage). Refit the plastic cover into its housing along with the associated parts.

Perform the same operation for the other ceiling lights in the roof panel. Test the correct functioning of the light after reassembly.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
How to Replace the Rear Headlight Bulbs in the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the instructions that will allow you to remove and replace the bulbs of the rear headlight of the Volkswagen Jetta. First, open the boot li…
Replacing Air Control Knob Bulbs on VW Jetta
Replacing Air Control Knob Bulbs on VW Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) Let’s replace the bulbs for the manual air conditioning control knobs on a Volkswagen Jetta. Remove the air vent knobs by hand. If you cannot pull th…
How to Replace the Number Plate Bulbs on the Volkswagen Jetta
How to Replace the Number Plate Bulbs on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's information will show you how to disassemble and replace the number plate bulbs on the Volkswagen Jetta. First, move to the rear and begin to…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos