Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the alternator fuse of the Volkswagen Vento located?

Model: Volkswagen Vento A5, MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

Today we will explain how to replace the alternator fuse of the Volkswagen Vento. The fuse in question is located inside the fuse box located inside the front hood; specifically, the box is located next to the battery.

To view the inside of the box and therefore replace the fuse, we need to open the front hood and remove the cover of the box. Using a key, we remove the fuse and insert the new one with the same amperage, which in this case is 30 Amps. After replacing the fuse, we close the cover of the box and the front hood.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

Where are the Fuses on the Volkswagen Vento?
Where are the Fuses on the Volkswagen Vento?
Volkswagen Vento (2018-2024 / MK 4, A7) Each fuse in the Volkswagen Vento is located inside one of the dedicated fuse boxes installed in the vehicle: in this type of car, there are two. The…
Where are the fuses located in the Volkswagen Vento?
Where are the fuses located in the Volkswagen Vento?
Volkswagen Vento (1991-1998 / A3, MK 1) Inside the Volkswagen Vento, all the fuses are contained within the single fuse box installed in the vehicle: in this type of car, the box is located…
Where is the fuse box of the Volkswagen Vento located?
Where is the fuse box of the Volkswagen Vento located?
Volkswagen Vento (2018-2024 / MK 4, A7) If you are curious to find out where the fuse box of your third series Volkswagen Vento is located, just pay attention to the following guide and the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos