Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake in the Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Parking brake

See other generations:
Video tutorial

In this tutorial, we can see how to adjust the handbrake in the Volkswagen Polo, an extremely simple and quick operation. First of all, we park the vehicle on a flat surface with the first gear engaged, then we grab the rear cup holder compartment, pull it upwards, and detach it from the base.

We then locate the adjustment nut, tighten it using a 10mm wrench, and reach the desired tension level. At this point, all that's left to do is to test the new adjustment on a suitable road, of course, in complete safety.


Posted on 17 July 2025 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To adjust the handbrake on the Volkswagen Polo, first lift the car using a jack. Once the car is off the ground, remove the left rear wheel and take …
How to Adjust the Handbrake of the Volkswagen Polo?
How to Adjust the Handbrake of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To adjust the handbrake of the Volkswagen Polo, lift the part of the centre tunnel located immediately behind the base of the handbrake lever. Once t…
How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, you will learn the steps to adjust the handbrake on the Volkswagen Polo. Before adjusting the handbrake, check the wear condition of the rear …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos