Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Parking brake

See other generations:
Video tutorial

To adjust the handbrake on the Volkswagen Polo, first lift the car using a jack. Once the car is off the ground, remove the left rear wheel and take off the cover located behind the handbrake to access the handbrake cable.

At this point, pull the handbrake to make two clicks and use a spanner to tighten the handbrake cable. To ensure the handbrake is correctly adjusted, release the handbrake and check that the caliper turns freely.

Now check that the handbrake only makes six clicks when fully pulled. Once the handbrake makes only six clicks and the caliper turns freely when the handbrake is released, it means it is correctly adjusted.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake of the Volkswagen Polo?
How to Adjust the Handbrake of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To adjust the handbrake of the Volkswagen Polo, lift the part of the centre tunnel located immediately behind the base of the handbrake lever. Once t…
How to Adjust the Handbrake on a Volkswagen Polo?
How to Adjust the Handbrake on a Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) On the Volkswagen Polo, adjust the handbrake by lifting the central tunnel section located just behind the base of the lever. Once this plastic cover…
How to Adjust the Handbrake on the Volkswagen Polo
How to Adjust the Handbrake on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today, you will learn the steps to adjust the handbrake on the Volkswagen Polo. Before adjusting the handbrake, check the wear condition of the rear …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos