Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Volkswagen Polo?

Model: Volkswagen Polo Polo 4, 9N, Polo IV, MK IV, MK 4 - Years 2001-2009
Part: Key

In order to program the key of the Volkswagen Polo, you will need to insert the blank key into the corresponding slot: this way, you will be able to connect a diagnostic tool to the OBD port of the vehicle, which is located under the steering column. Once the connection is established, you can select the specific model of the car and its corresponding version: then, you will need to follow the instructions to properly code the key. Once the operation is completed, you can turn off the ignition to finish.

Posted on 12 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Volkswagen Polo?
How do you program the key of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) In order to program the key of the Volkswagen Polo, you need to insert the key into the ignition switch and then connect the diagnostic tool to the O…
How do you program the key of the Volkswagen Polo?
How do you program the key of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) To program the key on the Volkswagen Polo, you will need to insert the blank key into the corresponding slot: once the ignition is turned on, you can…
How to replace the key cover of the Volkswagen Polo 5
How to replace the key cover of the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, Polo 5, MK 5, Polo V, MK V) If the protective cover of the key of your Volkswagen Polo MK5 is too worn or damaged, then you must replace it with a new one that is perfectly comp…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos