Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a VW Golf Mk3

Model: Volkswagen Golf MK 3, Golf III, Golf 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Headlight

See other generations:
Video tutorial

Want to remove the front headlight of a Volkswagen Golf 3? This instructional video shows you how to proceed with the disassembly. Open the bonnet by pulling the bonnet release lever and secure it; remove the central grille (as shown in the video), then unscrew the securing pins on the headlight bar using a socket wrench or battery-powered screwdriver.

At this point, you will find additional pins at the bottom of the headlight; unscrew them. Disconnect the power connectors and extract the headlight from the vehicle body.

Install the new headlight with new bulbs if damaged (always ensure the correct type and size) and insert the headlight into its housing. Finally, tighten the pins on the headlight with the plastic strap and the grille.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Replacement of the Front Headlight on the Volkswagen Golf
Replacement of the Front Headlight on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today's procedure will show you how to remove and replace the front headlight on the Volkswagen Golf, following the instructions below. First, open t…
Replacing the Front Headlight on a Volkswagen Golf
Replacing the Front Headlight on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The steps illustrated in this guide will show you how to remove and replace the front headlight on a Volkswagen Golf. First, open the car's bonnet an…
How to remove the front headlight on a VW Golf
How to remove the front headlight on a VW Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the headlight from a Volkswagen Golf 4. Lift the engine bonnet and secure it. Using a socket wrench, unscrew the fastening bolts …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos