Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely remove the Service indicator that is shown on the dashboard of the Volkswagen Jetta by holding down the 0.0/SET button located on the right side of the instrument panel: by continuing to hold down this button, it will be possible to insert the key into the corresponding ignition slot and turn it to turn on the instrument panel.

At this point, it will be possible to notice that the Service indicator will start flashing; then, it will be necessary to release the button and press the one on the left side of the dashboard.

In this way, the indicator will be reset and it will be possible to turn off the dashboard.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volkswagen Jetta
How to Reset the Service Light on a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Today, you will discover instructions that will allow you to reset the service light for the routine maintenance oil change on a Volkswagen Jetta. Fi…
How to Reset the Service Light on the Volkswagen Jetta 6
How to Reset the Service Light on the Volkswagen Jetta 6
Volkswagen Jetta (2010-2018 / MK 6, A6) To manually reset the service light on your Volkswagen Jetta Mk6 (2010-2018), follow these simple steps. First, enter the cabin and ensure the car is…
How to Reset the Service Light on a Volkswagen Jetta?
How to Reset the Service Light on a Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) You can clear the Service light from the instrument panel of the Volkswagen Jetta by turning on the ignition so you can press the OK button. After a …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos