Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the crankshaft rpm sensor on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Crankshaft RPM sensor
Operation: How to replace the crankshaft rpm sensor on Volkswagen Polo

How to replace the crankshaft rpm sensor on Volkswagen Polo? Let's see the procedure: we raise the front engine hood, we secure the same with the safety rod. We identify the crankshaft rpm sensor, with a socket wrench we can unscrew the locking pins (if present next to the valve). We detach the piece from the engine seat. We compare the worn piece with the new one, mount the piece with the respective clamping pins, connect the crankshaft rpm sensor. We check the maintenance carried out and the correct functioning of the piece.


Posted on 4 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the crankshaft position sensor located in the Volkswagen Polo? Read Answer
    • Polo 2017-2025 - Where is the crankshaft speed sensor located in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - Where is the crankshaft speed sensor located in the Volkswagen Polo with 1.2 engine? Read Answer
    • Polo 2001-2009 - Where is the rev sensor of the VW Polo 1.2 AZQ engine located? Read Answer
    • Polo 2001-2009 - Where is the engine speed sensor of the VW Polo 1.4 2001? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos