Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lambda sensor of the Volkswagen Jetta.

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oxygen sensor

See other generations:
Video tutorial

In a few simple steps, we will see the procedure for removing and replacing the lambda sensor of the Volkswagen Jetta. First, we open the car's hood and start by disconnecting the electrical connector of the lambda sensor, which we find at the top. Then, we use the appropriate tool to unscrew the oxygen sensor counterclockwise, as shown in the video.

At this point, we remove the lambda sensor along with its cable, replacing it with a new original one. We screw the oxygen sensor in by hand, then tighten it with the tool, and finally, we make the electrical connection.


Posted on 25 November 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Volkswagen Jetta
How to Reset the Oil Change Light on a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Before starting, sit in the driver's seat of your Volkswagen Jetta. Begin by pressing and holding the "0.0" button located below the multifunction di…
How to Reset the TPMS Light on the Volkswagen Jetta 2025
How to Reset the TPMS Light on the Volkswagen Jetta 2025
Volkswagen Jetta (2018-2025 / A7, MK 7) To quickly perform the manual reset of the TPMS light on your Volkswagen Jetta latest model (2025), follow the steps described in this dedicated guid…
Where is the fuse box of the Volkswagen Jetta 6 located?
Where is the fuse box of the Volkswagen Jetta 6 located?
Volkswagen Jetta (2010-2018 / MK 6, A6) If you want to quickly find the box containing all the fuses of your Volkswagen Jetta Mk6, just follow the steps described below and apply them in th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos