Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the rear light bulb of a Volkswagen Polo?

Model: Volkswagen Polo 6R, Polo V, MK V, Polo 5, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

It will be possible to replace the rear light bulb of the Volkswagen Polo by opening the rear hatch to access the screws next to the light assembly, which will now be accessible. Once these screws have been completely removed, the light assembly can be pulled out of its housing, and its connectors can be disconnected from the inside.

The bulb can now be removed from inside the light in order to insert the new one. The light can now be reconnected to the connector and reinserted into its housing so that it can be secured with the screws.


Posted on 22 December 2025 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) To replace the rear light bulb on the Volkswagen Polo, you will need to open the rear hatch and detach the side trim of the boot corresponding to the…
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) The bulbs of the headlights, both front and rear, of your car are destined to burn out over time and therefore need to be replaced. For those who pre…
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) How do you replace the bulbs in the rear headlamp on a Volkswagen Polo? This operation is very simple. Follow these steps: open the boot lid, then re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos