Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection (service) warning on a Volkswagen Jetta.

Model: Volkswagen Jetta A7, MK 7 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to reset the inspection (service) warning of the Volkswagen Jetta. First, let's get inside the vehicle and start turning on the instrument panel; then we go to the onboard computer settings using the steering wheel controls, and then navigate to the service menu, as shown in the video.

At this point, we confirm and perform the maintenance interval reset, thus resetting the service mileage counter; finally, we turn off the ignition and start the engine, completing the service reset operation.


Posted on 27 December 2025 by ScegliAuto


Related tutorials

Reset the maintenance (service) warning of the Volkswagen Jetta.
Reset the maintenance (service) warning of the Volkswagen Jetta.
Volkswagen Jetta (2018-2025 / A7, MK 7) Following the instructions in this guide, we will see how to reset the regular maintenance (service) warning of the Volkswagen Jetta. First, let's ge…
Resetting the Service Light on Volkswagen Jetta
Resetting the Service Light on Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) Today we will see the step-by-step instructions that will allow us to reset the service light for the regular maintenance oil change on the Volkswage…
How to reset the service of the Volkswagen Jetta
How to reset the service of the Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) Today's procedure will show us the steps on how to reset the maintenance service light for the oil change of the Volkswagen Jetta. First, we get into…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos