Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Volkswagen Polo, get in the vehicle and ensure the instrument cluster is off. Press and hold the trip odometer button located on the instrument cluster. While holding it down, insert the key and turn on the cluster without starting the engine.

After a few seconds, a reset request for the maintenance interval will appear on the display. At this point, release the button and turn the clock or reset knob located next to the instrument cluster to the right.

The display will confirm the maintenance reset. Finally, switch off the cluster and turn it back on to check that the Service light has been correctly cleared.


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Volkswagen Polo
How to reset the service light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Today, let's look at how to reset the oil change service light on the Volkswagen Polo in simple steps. First, get in the car and turn on the instrume…
How to Reset the Service Light on a 2021 Volkswagen Polo
How to Reset the Service Light on a 2021 Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) This tutorial shows the procedure to reset the service light on a Volkswagen Polo. This is useful if the light remains on even after performing the s…
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos